TIRE REPAIR KIT QUICK TIRE WHEEL REPAIR
It's a great replacement for your spare tire . It's also an ideal accessory for your car. It's compatible with tubeless tires. This repair kit will help you fix punctures quickly and effectively.
Its small size makes it very handy so you can always have it at hand. You never know what might happen on the road so it's worth checking out our set!
INCLUDED
drill with handle
awl with a handle
5 vulcanizing cords each 10 cm long
glue 12g
The kit allows for quick repair of a punctured tire.
It is perfect for off-road use when it is not possible to replace a flat tire.
However please remember that this is a temporary solution that allows you to reach your destination or the nearest tire repair shop.
The kit is not suitable for a cut tire or side puncture but only in places where there is tread.
Instructions for use:
1. Remove the nail from the area where the tire was punctured.
2. Coat the cutter with the included glue and drive it into the hole left by the nail following the angle at which the nail entered the tire to fill the hole well with glue.
3. Thread the string onto the awl and bend it in half ends up.
4. Coat the cord with glue and press the threaded cord into the nail hole using an awl following the angle of the previous penetration. Firmly push the awl and cord through the damaged area.
Remember to pass the cord through the entire tire layer.
Be careful not to pull the entire cord inward.
The two ends of the string should extend approximately 0.5-1cm above the tire tread. Firmly remove the awl from the tire (do not twist the awl inside the tire while removing it – this may cause it to break).
5. Cut off the two protruding ends of the cord leaving 5 mm above the tire. As you drive the cord will be flush with the tread surface.
SKU number: AM01251